ON 07429 370015






XTZ Cinema 1x12 Subwoofer

Price: £735

Availability - In stock end of August

Cinema 1X12 Subwoofer - that’s true cinema!
The Subwoofer of XTZ's new cinema-series, 1X12 was only built for one task: To make you experience the world of true cinema! Therefore they had to forge an entirely new paths. The 1X12 is unique on the hi-fi-market in many ways but despite its high level of materials, the 1x12 is quite affordable.
Extremely inert cabinet
To ensure that there are no resonances within the cabinet that affect the sound quality, a large effort was made to construct the cabinet as stable as possible. Starting with the trapezoidal shaped cabinet t, the walls are constructed of 18mm MDF, reinforced with 40mm thick bracing, while the baffle is a stout 30mm thick. The base adds an additional 30mm to the cabinet bottom for a total of 48mm to fix the cabinet to the floor and ensure all of the high energy transients are reproduced faithfully. Inside, the cabinet is well treated with multiple layers of acoustical damping material. Lastly, the cabinet is elegantly finished with 8 layers of hand rubbed satin black paint to work well with any room décor.
High-End 12” Driver
Required to provide very high sound pressure levels yet remain precise and true to the original music, this challenge was met by using the specially developed low-mass long throw driver. The 12” cone consists of a very strong, long fiber pulp blended material optimizing the diaphragm’s stiffness to weight ratio. Additional advantages of XTZ's custom designed driver include:
FEA Optimized magnetic field design incorporating a tightly focus “T” pole design
Advanced level of large signal motor and suspension refinement using KLIPPEL laser based test system
Large aluminum shorting ring to minimize inductance and further lower non-linear distortion
Ultra high temp voice coil with Airflow Maximizer Design
Special surround from NBR with maximum linearity throughout its excursion range
Spider fabricated from unique blend of poly-cotton and pure NOMEX
Claridy Class-D Amplifier
This completely new development has an extraordinary high power output of 500W RMS and almost 3 times that in peak wattage output whenever it is needed. In contrast to many other class-D amplifiers, The Claridy amp has a near ideal clipping characteristics which ensures maximum headroom capability by minimizing the use of limiting circuitry. Never before experienced amount of details and maximum performance are the result of years of design refinement.
Room-Tuning and Sound Adjustments
To provide an optimal sound quality, suited to various room sizes and listener tastes, the 1X12 is equipped with a lot of possibilities to adjust the sound adequately. The included foam plug for the slot vent chamber yields highly detailed sealed box design. Furthermore, it is possible to either change the lower limit frequency or even transform the sealed subwoofer into a bass-reflex system by removing the plug. Further refinements can be made with adjustment of the two EQ’s available and of course volume, phase, crossover frequency.
Type:Single 12” Bass Reflex Slot Port / Sealed Hybrid
Amplifier: Claridy Class D monoblock
Power: 500 W RMS 900 W Peak
Frequency response
Anechoic EQ: 19 - 160Hz Ported / 24 - 160Hz Closed
Room Gain EQ: 30 - 160Hz Ported / 36 - 160Hz Closed
EQ: 2 position - Anechoic, Room Gain
xover: variable 40-160Hz, Bypass , Auto subsonic
Level: Fixed Ref Level, variable gain
Input: XLR, (2)RCA
Output: XLR pass-thru
Phase: Variable 0-180
Color : Non reflective Matte black 8 layers paint
Size: H 450 x W 510 x D 475 mm
Weight : 29kg







Projector Screens

Amplifiers & Receivers



Room Measurement

Home Cinema Seating
Blu-ray Players